When your furnace fails to do its job, you can rely on Green Energy Mechanical Inc. for a job well done. Call us today!
After a power outage, your furnace might blow cold air instead of the warm comfort you expect. This common issue can leave you shivering and wondering what went wrong.
In this guide, our team at Green Energy Mechanical Inc. will explain why your furnace is blowing cold air after a power outage and how to address this problem. If you’re experiencing persistent issues, it’s best to contact a furnace repair contractor in Canton, MA, for professional assistance.
It’s Not Receiving Any Power
When your furnace blows cold air after a power outage, the first thing to check is whether it’s receiving power. Power disruptions can trip circuit breakers or blow fuses, cutting off electricity to your heating system.
To troubleshoot this issue, start by locating your home’s electrical panel. Check for tripped breakers or blown fuses, and reset the breaker or replace the fuse if necessary.
If your furnace still doesn’t power on, the issue might be more complex. In this case, it’s best to call a professional for heating system troubleshooting to avoid any safety risks associated with electrical components.
Your Canton Home’s Thermostat Is Malfunctioning
A power outage can sometimes disrupt your thermostat settings, leading to a furnace malfunction. Faulty thermostat settings may send incorrect signals to your furnace, causing it to blow cold air instead of heat. According to the Occupational Safety and Health Administration, proper indoor air quality, including temperature control, is crucial for comfort and health.
To address thermostat issues, first confirm that the thermostat display is on. Ensure it’s set to “Heat” mode and verify that the setting is above room temperature.
If these steps don’t resolve the issue, you may need to replace the thermostat batteries or recalibrate the device. Persistent problems could indicate a need for thermostat replacement or professional inspection.
You’re Dealing With Pilot Light Issues
If your furnace blows cold air, you could have pilot light problems. For gas furnaces, pilot light issues can cause your system to blow cold air. Power outages can extinguish the pilot light, preventing your furnace from igniting and producing heat.
To check your pilot light, locate the pilot light assembly (consult your furnace manual if unsure) and look for a small flame. If the flame is out, follow the manufacturer’s instructions to relight it.
Be cautious when dealing with gas furnace problems. If you smell gas or are unsure about relighting the pilot, turn off the gas supply and contact a professional immediately.
You Have Blocked Air Ducts
While not directly related to power outages, blocked air ducts can cause a furnace to blow cold air instead of warm. Debris, dust, or objects in your ductwork can restrict airflow, preventing warm air from circulating properly. Signs of blocked air ducts include uneven heating throughout your home, weak airflow from vents, and unusual noise from the ductwork.
Regular duct cleaning can prevent these issues. If you suspect blocked air ducts, consider scheduling a professional inspection and cleaning service.
You Need To Reset the System
After a power outage, your furnace might need a simple reset to resume normal operation. Modern furnaces have safety features that can cause them to shut down during power fluctuations.
To reset your furnace, turn off the power to the furnace at the circuit breaker. Wait for about 30 seconds, then turn the power back on.
This process can often resolve minor glitches caused by power outages. If your furnace continues to blow cold air after resetting, it’s time to call in a professional.
Contact Green Energy Mechanical Inc. If Your Furnace Blows Cool Air in Canton, MA
When your furnace is blowing cold air after a power outage, it can be frustrating and uncomfortable. We’ve outlined several potential causes and solutions to help you troubleshoot the issue. However, if you’re still experiencing problems, don’t hesitate to reach out to Green Energy Mechanical Inc. for expert assistance.
Our team of skilled technicians can diagnose and resolve your heating system issues quickly and efficiently. We also offer advice on ways to get the best results from new furnace installations. Our commitment to excellence and customer satisfaction ensures your home stays warm and comfortable all winter.
If you have a furnace blowing cold air in your home after a power outage, reach out to our heating experts at Green Energy Mechanical Inc. by calling us today.
